Phoenix Contact

Supported devices: EEM-MA370 / EEM-MA371, EEM-MA600 and EEM-MA770 / EEM-MA771 series

Supported devices

We support the following Phoenix Contact energy meters:

• EEM-MA370 and EEM-MA371, including the -R variants

• EEM-MA600

• EEM-MA770 and EEM-MA771, including the -EIP variants

All of them are read over Modbus TCP and configured the same way.

This parameter must be set as shown in the image. If it is not configured this way, you can change it by logging into the web interface using the password adm1n.

Configuration

In the interface of the meter, set the Modbus settings as indicated in the screenshot.

• Modbus TCP should be enabled

• Compatibility mode should be disabled